안녕하세요! 문의좀 드리려고 합니다.

atmega128 과 하이퍼터미널을 이용해서 mpu6050 자이로 센서의 값을 읽으려고 하는데

하이퍼터미널에서 값이 나타나지 않는 이유가 뭐지 잘 모르겠습니다 ㅠㅠ

아래에 소스코드 같이 첨부해드립니다.

감사합니다.

#define F_CPU 16000000UL
#define FS_SEL 131

#include<avr/io.h>
#include<avr/interrupt.h>
#include<util/delay.h>
#include<math.h>

 
void twi_write(unsigned char address,unsigned char data);
unsigned char twi_read(char addressr);
void USART_Transmit(unsigned char tx_data);
void USART_Transmit_init4(int data);
void get_raw_data();
void calibrate();

volatile double dt = 0.000;
volatile int temp;
volatile unsigned char a_x_l,a_x_h,a_y_l,a_y_h,a_z_l,a_z_h;
volatile unsigned char g_x_l,g_x_h,g_y_l,g_y_h,g_z_l,g_z_h;
volatile double bas_a_x,bas_a_y,bas_a_z;
volatile double bas_g_x,bas_g_y,bas_g_z;
volatile double a_x,a_y,a_z;
volatile double g_x,g_y,g_z;
volatile double las_angle_gx,las_angle_gy,las_angle_gz;
volatile double angle_ax,angle_ay,angle_az;
volatile double angle_gx,angle_gy,angle_gz;
volatile double roll,pitch,yaw;
volatile double alpha;

int main()
{ 

 //UART
 UCSR0A = 0x00;
 UCSR0B = (1<<TXEN0);
 UCSR0C = (3<<UCSZ00); 
 UBRR0H = 0;
 UBRR0L = 103;  //9600

 //TWI(I2C)
 TWCR = (1<<TWEN);
 TWBR = 12;    //400khz

 //TIMER0
 TCCR0 = (1<<CS02)|(1<<CS01); //256 분주
 TCNT0 = 256-125;    //125 번 => 0.002s
 TIMSK = (1<<TOIE0);

 //MPU6050 init
 twi_write(0x6B, 0x00);  //sleep 끔
 twi_write(0x1A, 0x05);  //DLPF 10Hz

 calibrate();

 

 SREG = 0x80;

 while(1)
 {

  get_raw_data();

  las_angle_gx = roll; //최근값 누적
  las_angle_gy = pitch;
  las_angle_gz = yaw;

  temp = (a_x_h<<8) | a_x_l;
  a_x = - temp - 16383;
  temp = (a_y_h<<8) | a_y_l;
  a_y = - temp;
  temp = (a_z_h<<8) | a_z_l;
  a_z = temp;
  temp = (g_x_h<<8) | g_x_l;
  g_x = temp;
  temp = (g_y_h<<8) | g_y_l;
  g_y = temp;
  temp = (g_z_h<<8) | g_z_l;
  g_z = temp;

  g_x = (g_x - bas_g_x)/FS_SEL;
  g_y = (g_y - bas_g_y)/FS_SEL;
  g_z = (g_z - bas_g_z)/FS_SEL;
  
  angle_ax = atan(-1.000*a_y/sqrt(pow(a_x,2) + pow(a_z,2)))*180/3.141592;
  angle_ay = atan(a_x/sqrt(pow(a_y,2) + pow(a_z,2)))*180/3.141592;

  angle_gx = g_x*dt + las_angle_gx;
  angle_gy = g_y*dt + las_angle_gy;
  angle_gz = g_z*dt + las_angle_gz;

  dt = 0.000;

  alpha = 0.96;
  roll = alpha*angle_gx + (1.000 - alpha)*angle_ax;
  pitch = alpha*angle_gy + (1.000 - alpha)*angle_ay;
  yaw = angle_gz;
  
  USART_Transmit_init4(roll);
  USART_Transmit('\t');
  USART_Transmit_init4(pitch);
  USART_Transmit('\t');
  USART_Transmit_init4(yaw);
  USART_Transmit('\n');
  USART_Transmit('\r');
  
  _delay_ms(100);

 }

}

ISR(TIMER0_OVF_vect) //0.002s
{
 dt += 0.002;

 TCNT0 = 256-125;
}

void calibrate() //초기값 읽기
{
 int cal = 10;

 for(int i=0; i<cal; i++) //평균
 {
  get_raw_data();
 
  temp = (a_x_h<<8) | a_x_l;
  a_x += - temp - 16383;
  temp = (a_y_h<<8) | a_y_l;
  a_y += - temp;
  temp = (a_z_h<<8) | a_z_l;
  a_z += temp;
  temp = (g_x_h<<8) | g_x_l;
  g_x += temp;
  temp = (g_y_h<<8) | g_y_l;
  g_y += temp;
  temp = (g_z_h<<8) | g_z_l;
  g_z += temp;

  _delay_ms(100);
 } 
 
 a_x /= cal;
 a_y /= cal;
 a_z /= cal;
 g_x /= cal;
 g_y /= cal;
 g_z /= cal;

 bas_a_x = a_x; //초기 값으로 저장
 bas_a_y = a_y;
 bas_a_z = a_z;
 bas_g_x = g_x;
 bas_g_y = g_y;
 bas_g_z = g_z;

}

void get_raw_data()
{
 a_x_h = twi_read(0x3B);  //x축 가속도
 a_x_l = twi_read(0x3C);
 a_y_h = twi_read(0x3D);  //y축 가속도
 a_y_l = twi_read(0x3E);  
 a_z_h = twi_read(0x3F);  //z축 가속도
 a_z_l = twi_read(0x40);  
 g_x_h = twi_read(0x43);  //x축 각속도
 g_x_l = twi_read(0x44);  
 g_y_h = twi_read(0x45);  //y축 각속도
 g_y_l = twi_read(0x46);  
 g_z_h = twi_read(0x47);  //z축 각속도
 g_z_l = twi_read(0x48);  
}

void twi_write(unsigned char address,unsigned char data)
{
 TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN); //START

 while(!(TWCR & (1<<TWINT))); //TWINT flag 기다림
 while((TWSR&0xF8) != 0x08);  //START 상태(08) 기다림 

 TWDR = 0b11010000;    //AD(1101000)+W(0)
 TWCR = (1<<TWINT)|(1<<TWEN); //전송

 while(!(TWCR & (1<<TWINT)));
 while((TWSR&0xF8) != 0x18);  //SLA+W ACK 상태(18) 기다림

 TWDR = address;     //register address
 TWCR = (1<<TWINT)|(1<<TWEN); //전송

 while(!(TWCR & (1<<TWINT)));
 while((TWSR&0xF8) != 0x28);  //Data ACK 상태(28) 기다림

 TWDR = data;      //data
 TWCR = (1<<TWINT)|(1<<TWEN); //전송 

 while(!(TWCR & (1<<TWINT)));
 while((TWSR&0xF8) != 0x28);

 TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN); //STOP
}

 

unsigned char twi_read(char address)
{
 unsigned char data;

 TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN); //START

 while(!(TWCR & (1<<TWINT))); //TWINT flag 기다림
 while((TWSR&0xF8) != 0x08);  //START 상태(08) 기다림 

 TWDR = 0b11010000;    //AD(1101000)+W(0)
 TWCR = (1<<TWINT)|(1<<TWEN); //전송

 while(!(TWCR & (1<<TWINT)));
 while((TWSR&0xF8) != 0x18);  //SLA+W ACK 상태(18) 기다림

 TWDR = address;     //register address
 TWCR = (1<<TWINT)|(1<<TWEN); //전송

 while(!(TWCR & (1<<TWINT)));
 while((TWSR&0xF8) != 0x28);  //Data ACK 상태(28) 기다림

 TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN); //Repeat START

 while(!(TWCR & (1<<TWINT)));
 while((TWSR&0xF8) != 0x10);  //Repeat START 상태(08) 기다림

 TWDR = 0b11010001;    //AD(1101000)+R(1)
 TWCR = (1<<TWINT)|(1<<TWEN); //전송

 while(!(TWCR & (1<<TWINT)));
 while((TWSR&0xF8) != 0x40);  //SLA+R ACK 상태(40) 기다림

 TWCR = (1<<TWINT)|(1<<TWEN); //전송

 while(!(TWCR & (1<<TWINT)));
 while((TWSR&0xF8) != 0x58);  //ACK 상태(58) 기다림

 data = TWDR;

 TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN); //STOP

 return data;
}

void USART_Transmit(unsigned char tx_data)
{
 while(!(UCSR0A & (1<<UDRE0)));
 UDR0 = tx_data;
}

void USART_Transmit_init4(int data)
{
 if(data < 0)
 {
  data = -data;
  USART_Transmit('-');
 }
 else
  USART_Transmit(' ');

 int temp = 0;
 temp = data/10000;
 USART_Transmit(temp+48);
 temp = (data%10000)/1000;
 USART_Transmit(temp+48);
 temp = (data%1000)/100;
 USART_Transmit(temp+48);
 temp = (data%100)/10; 
 USART_Transmit(temp+48);
 temp = data%10;
 USART_Transmit(temp+48);
}